author | shuide.chen <shuide.chen@amlogic.com> | 2019-06-26 03:30:29 (GMT) |
---|---|---|
committer | Shuide Chen <shuide.chen@amlogic.com> | 2019-06-26 03:33:32 (GMT) |
commit | 84e7abba4d8a36ff85e220092e18dd6a5dc2aa28 (patch) | |
tree | 606f52f7f4632590f2221a71b7d80e5cc90f39ec | |
parent | 0a7f9757d2018208f66630b6a7423435136a1409 (diff) | |
download | common-84e7abba4d8a36ff85e220092e18dd6a5dc2aa28.zip common-84e7abba4d8a36ff85e220092e18dd6a5dc2aa28.tar.gz common-84e7abba4d8a36ff85e220092e18dd6a5dc2aa28.tar.bz2 |
build: do not touch file in kernel
Problem:
Previous we support build different type of dts, based on
device configuration, but this make the kernel DIRTY
Solution:
for specific atom device, this is freezed, do not need support
this feature
Verify:
Locally
Change-Id: I7f43f9b24222382b9e7989da1bf287f3a0cca20d
Signed-off-by: shuide.chen <shuide.chen@amlogic.com>
-rw-r--r-- | factory.mk | 2 |
1 files changed, 0 insertions, 2 deletions
@@ -124,8 +124,6 @@ endif# ifeq ($(PRODUCT_BUILD_SECURE_BOOT_IMAGE_DIRECTLY),true) $(INSTALLED_BOARDDTB_TARGET) : $(KERNEL_DEVICETREE_SRC) $(DTCTOOL) $(DTIMGTOOL) $(foreach aDts, $(KERNEL_DEVICETREE), \ - sed -i 's/^#include \"partition_.*/#include \"$(TARGET_PARTITION_DTSI)\"/' $(KERNEL_ROOTDIR)/$(KERNEL_DEVICETREE_DIR)/$(strip $(aDts)).dts; \ - sed -i 's/^#include \"firmware_.*/#include \"$(TARGET_FIRMWARE_DTSI)\"/' $(KERNEL_ROOTDIR)/$(KERNEL_DEVICETREE_DIR)/$(TARGET_PARTITION_DTSI); \ if [ -f "$(KERNEL_ROOTDIR)/$(KERNEL_DEVICETREE_DIR)/$(aDts).dtd" ]; then \ $(MAKE) -C $(KERNEL_ROOTDIR) O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(PREFIX_CROSS_COMPILE) $(strip $(aDts)).dtd; \ fi;\ |