147 files changed, 55964 insertions, 55946 deletions
diff --git a/tvapi/libtv/tvsetting/CBlobDeviceE2prom.h b/tvapi/libtv/tvsetting/CBlobDeviceE2prom.h index 189cc15..2e0e0c5 100644 --- a/tvapi/libtv/tvsetting/CBlobDeviceE2prom.h +++ b/tvapi/libtv/tvsetting/CBlobDeviceE2prom.h @@ -1,77 +1,76 @@ -#ifndef BLOB_E2PROM_H -#define BLOB_E2PROM_H - -#include "CBlobDevice.h" - -#define I2C_RETRIES 0x0701 /* number of times a device address - should be polled when not - acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ - -/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses - * are NOT supported! (due to code brokenness) - */ -#define I2C_SLAVE 0x0703 /* Use this slave address */ -#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it - is already in use by a driver! */ -#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ -#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ -#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ -#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ -#define I2C_SMBUS 0x0720 /* SMBus transfer */ - -struct i2c_msg { - unsigned short addr; /* slave address */ - unsigned short flags; -#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ -#define I2C_M_WR 0x0000 /* write data, from master to slave */ -#define I2C_M_RD 0x0001 /* read data, from slave to master */ -#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ - - unsigned short len; /* msg length */ - unsigned char *buf; /* pointer to msg data */ -}; - -struct i2c_rdwr_ioctl_data { - struct i2c_msg *msgs; - unsigned int nmsgs; -}; - -// 24C64 eeprom -#define E2P_MSG_BUF_SIZE (34) - -class CBlobDeviceE2prom: public CBlobDevice -{ - -public: - CBlobDeviceE2prom(); - virtual ~CBlobDeviceE2prom(); - - virtual int WriteBytes(int offset, int size, unsigned char *buf); - virtual int ReadBytes(int offset, int size, unsigned char *buf); - virtual int EraseAllData(); - virtual int InitCheck(); - virtual int OpenDevice(); - virtual int CloseDevice(); - -private: - -private: - /*int E2P_DEV_TOTAL_SIZE; - int E2P_DEV_RW_START_OFFSET; - int E2P_DEV_RW_END_OFFSET; - int E2P_DEV_W_PAGE_SIZE; - int E2P_DEV_R_PAGE_SIZE; - int E2P_DEV_SLAVE_ADDR; - int E2P_DEV_RW_TEST_OFFSET; - int device_use_buffer; - unsigned char *device_buf; - char gFilePathBuf[CC_MAX_FILE_PATH];*/ -}; - - -#endif +#ifndef BLOB_E2PROM_H
+#define BLOB_E2PROM_H
+
+#include "CBlobDevice.h"
+
+#define I2C_RETRIES 0x0701 /* number of times a device address
+ should be polled when not
+ acknowledging */
+#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */
+
+/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are NOT supported! (due to code brokenness)
+ */
+#define I2C_SLAVE 0x0703 /* Use this slave address */
+#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it
+ is already in use by a driver! */
+#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */
+#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */
+#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */
+#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */
+#define I2C_SMBUS 0x0720 /* SMBus transfer */
+
+struct i2c_msg {
+ unsigned short addr; /* slave address */
+ unsigned short flags;
+#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
+#define I2C_M_WR 0x0000 /* write data, from master to slave */
+#define I2C_M_RD 0x0001 /* read data, from slave to master */
+#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
+
+ unsigned short len; /* msg length */
+ unsigned char *buf; /* pointer to msg data */
+};
+
+struct i2c_rdwr_ioctl_data {
+ struct i2c_msg *msgs;
+ unsigned int nmsgs;
+};
+
+// 24C64 eeprom
+#define E2P_MSG_BUF_SIZE (34)
+
+class CBlobDeviceE2prom: public CBlobDevice {
+
+public:
+ CBlobDeviceE2prom();
+ virtual ~CBlobDeviceE2prom();
+
+ virtual int WriteBytes(int offset, int size, unsigned char *buf);
+ virtual int ReadBytes(int offset, int size, unsigned char *buf);
+ virtual int EraseAllData();
+ virtual int InitCheck();
+ virtual int OpenDevice();
+ virtual int CloseDevice();
+
+private:
+
+private:
+ /*int E2P_DEV_TOTAL_SIZE;
+ int E2P_DEV_RW_START_OFFSET;
+ int E2P_DEV_RW_END_OFFSET;
+ int E2P_DEV_W_PAGE_SIZE;
+ int E2P_DEV_R_PAGE_SIZE;
+ int E2P_DEV_SLAVE_ADDR;
+ int E2P_DEV_RW_TEST_OFFSET;
+ int device_use_buffer;
+ unsigned char *device_buf;
+ char gFilePathBuf[CC_MAX_FILE_PATH];*/
+};
+
+
+#endif
|