66 files changed, 0 insertions, 15542 deletions
diff --git a/doc/KERNEL-MODE-PPPOE b/doc/KERNEL-MODE-PPPOE deleted file mode 100755 index 03e6d2a..0000000 --- a/doc/KERNEL-MODE-PPPOE +++ b/dev/null @@ -1,98 +0,0 @@ -# LIC: GPL - -RP-PPPoE now supports kernel-mode PPPoE on Linux kernels 2.4 or newer. -However, the default "./go" build procedure does not make kernel-mode -support. - -Here's what you need to do: - -0) Make sure you are running kernel 2.4 or newer on the machine you -will build rp-pppoe on. You must have the following kernel -configuration settings: - - CONFIG_PPP=m or CONFIG_PPP=y - CONFIG_PPP_ASYNC=m or CONFIG_PPP_ASYNC=y - CONFIG_PPP_SYNC_TTY=m or CONFIG_PPP_SYNC_TTY=y - CONFIG_PPP_DEFLATE=m or CONFIG_PPP_DEFLATE=y - CONFIG_PPP_BSDCOMP=m or CONFIG_PPP_BSDCOMP=y - CONFIG_PPPOE=m or CONFIG_PPPOE=y - CONFIG_N_HDLC=m or CONFIG_N_HDLC=y - CONFIG_UNIX98_PTYS=y - -You also need a /dev/ppp file: - - mknod --mode=664 /dev/ppp c 108 0 - -You might want to add these lines to /etc/modules.conf: - - alias char-major-108 ppp_generic - alias tty-ldisc-3 ppp_async - alias tty-ldisc-13 n_hdlc - alias tty-ldisc-14 ppp_synctty - alias net-pf-24 pppoe - -1) If you are running pppd older than 2.4.0, check out the latest -version of the PPP software from the CVS repository at cvs.samba.org. -Here's how to do this: - - cvs -d :pserver:cvs@pserver.samba.org:/cvsroot login - # When prompted for a password, type "cvs" - - # Change to the directory in which you want to store the PPP source - # code. - cd /path/to/checked/out/sources - - # Check out the source - cvs -z5 -d :pserver:cvs@pserver.samba.org:/cvsroot co ppp - -If you are running pppd 2.4.0 or newer, and have the pppd development -headers installed, you can skip steps 1 and 2. - -2) The source gets checked out into a subdirectory called ppp. If -the source ends up in /path/to/checked/out/sources/ppp, then call -that path $PPPDIR. - -Build and install the checked-out ppp code according to its instructions. - -3) Unpack rp-pppoe. - -4) In the rp-pppoe directory, change to src/ and type: - - ./configure --enable-plugin=$PPPDIR - -where $PPPDIR, of course, refers to the checked-out "ppp" directory -from cvs.samba.org. - -If you didn't check out the PPP software from cvs.samba.org, use: - - ./configure --enable-plugin - -This will work if the header pppd/pppd.h is located in /usr/include -or /usr/local/include. - -4) Type make; make install - -5) Edit /etc/ppp/pppoe.conf to include this line: - - LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so - -After that, pppoe-start should use kernel-mode PPPoE. - -The rp-pppoe.so plugin adds the following command-line options to pppd: - -ethXXX -- Use interface ethXXX as Ethernet interface -brXXX -- Use interface brXXX as Ethernet interface -nic-XXXX -- Use interface XXXX as the Ethernet interface - -rp_pppoe_service SERVICE_NAME -- Specify desired service name -rp_pppoe_ac NAME -- Specify desired access concentrator name -rp_pppoe_verbose 0|1 -- Print names of access concentrators - -rp_pppoe_sess nnnn:aa:bb:cc:dd:ee:ff -- Attach to existing session 'nnnn' - on AC with Ethernet address aa:bb:cc:dd:ee:ff - This skips the discovery phase. - - --- -David F. Skoll <dfs@roaringpenguin.com> - |