66 files changed, 0 insertions, 15542 deletions
diff --git a/scripts/pppoe-connect.in b/scripts/pppoe-connect.in deleted file mode 100755 index 635cffe..0000000 --- a/scripts/pppoe-connect.in +++ b/dev/null @@ -1,319 +0,0 @@ -#!/bin/sh -# @configure_input@ -#*********************************************************************** -# -# pppoe-connect -# -# Shell script to connect to a PPPoE provider -# -# Copyright (C) 2000 Roaring Penguin Software Inc. -# -# $Id$ -# -# This file may be distributed under the terms of the GNU General -# Public License. -# -# LIC: GPL -# -# Usage: pppoe-connect [config_file] -# pppoe-connect interface user [config_file] -# Second form overrides USER and ETH from config file. -# If config_file is omitted, defaults to /etc//ppp/pppoe.conf -# -#*********************************************************************** - -# From AUTOCONF -prefix=@prefix@ -exec_prefix=@exec_prefix@ -localstatedir=/var - -# Paths to programs -IFCONFIG=/sbin/ifconfig -PPPD=@PPPD@ -SETSID=@SETSID@ -PPPOE=@sbindir@/pppoe -LOGGER="/usr/bin/logger -t `basename $0`" - -# Set to "C" locale so we can parse messages from commands -LANG=C -export LANG - -# Must be root -if test "`@ID@ -u`" != 0 ; then - echo "$0: You must be root to run this script" >& 2 - exit 1 -fi - -if test "$SETSID" != "" -a ! -x "$SETSID"; then - SETSID="" -fi - -CONFIG=/etc//ppp/pppoe.conf -USER="" -ETH="" - -# Sort out command-line arguments -case "$#" in - 1) - CONFIG="$1" - ;; - 3) - CONFIG="$3" - ;; -esac - -if test ! -f "$CONFIG" -o ! -r "$CONFIG" ; then - echo "$0: Cannot read configuration file '$CONFIG'" >& 2 - exit 1 -fi -export CONFIG -. $CONFIG - -PPPOE_PIDFILE="$PIDFILE.pppoe" -PPPD_PIDFILE="$PIDFILE.pppd" - -# Check for command-line overriding of ETH and USER -case "$#" in - 2|3) - ETH="$1" - USER="$2" - ;; -esac - -# Check that config file is sane -if test "$USER" = "" ; then - echo "$0: Check '$CONFIG' -- no setting for USER" >& 2 - exit 1 -fi -if test "$ETH" = "" ; then - echo "$0: Check '$CONFIG' -- no setting for ETH" >& 2 - exit 1 -fi - -PPPD_PID=0 - -# Catch common error -if test "$DEBUG" = "1" ; then - echo "*** If you want to use DEBUG, invoke pppoe-start, not pppoe-connect." - exit 1 -fi - -if test "$DEBUG" != "" ; then - if test "$LINUX_PLUGIN" != "" ; then - echo "Cannot use DEBUG mode and LINUX_PLUGIN at the same time." - echo "Kernel-mode PPPoE is experimental and unsupported." - exit 1 - fi - echo "* The following section identifies your Ethernet interface" >> $DEBUG - echo "* and user name. Some ISP's need 'username'; others" >> $DEBUG - echo "* need 'username@isp.com'. Try both" >> $DEBUG - echo "ETH=$ETH; USER=$USER" >> $DEBUG - echo "---------------------------------------------" >> $DEBUG -fi - -# MTU of Ethernet card attached to modem MUST be 1500. This apparently -# fails on some *BSD's, so we'll only do it under Linux - -if test `uname -s` = Linux ; then - $IFCONFIG $ETH up mtu 1500 - # For 2.4 kernels. Will fail on 2.2.x, but who cares? - modprobe ppp_generic > /dev/null 2>&1 - modprobe ppp_async > /dev/null 2>&1 - modprobe ppp_synctty > /dev/null 2>&1 - if test -n "$LINUX_PLUGIN" ; then - modprobe pppox > /dev/null 2>&1 - modprobe pppoe > /dev/null 2>&1 - fi -fi - -if test "$SYNCHRONOUS" = "yes" ; then - PPPOE_SYNC=-s - PPPD_SYNC=sync - # Increase the chances of it working on Linux... - if test `uname -s` = Linux ; then - modprobe n_hdlc > /dev/null 2>&1 - fi -else - PPPOE_SYNC="" - PPPD_SYNC="" -fi - -if test -n "$ACNAME" ; then - ACNAME="-C $ACNAME" -fi - -if test -n "$SERVICENAME" ; then - SERVICENAMEOPT="-S $SERVICENAME" -else - SERVICENAMEOPT="" -fi - -if test "$CLAMPMSS" = "no" ; then - CLAMPMSS="" -else - CLAMPMSS="-m $CLAMPMSS" -fi - -# If DNSTYPE is SERVER, we must use "usepeerdns" option to pppd. -if test "$DNSTYPE" = "SERVER" ; then - PEERDNS=yes - USEPEERDNS=yes -fi - -if test "$PEERDNS" = "yes" ; then - PEERDNS="usepeerdns" -else - PEERDNS="" -fi - -# Backward config file compatibility -- PEERDNS used to be USEPEERDNS -if test "$USEPEERDNS" = "yes" ; then - PEERDNS="usepeerdns" -fi -if test "$USEPEERDNS" = "no" ; then - PEERDNS="" -fi - - -# Backward config file compatibility -if test "$DEMAND" = "" ; then - DEMAND=no -fi - -if test "$DEMAND" = "no" ; then - DEMAND="" -else - DEMAND="demand persist idle $DEMAND 10.112.112.112:10.112.112.113 ipcp-accept-remote ipcp-accept-local connect true noipdefault ktune" -fi - -case "$FIREWALL" in - STANDALONE) - . /etc/ppp/firewall-standalone - ;; - MASQUERADE) - . /etc/ppp/firewall-masq - ;; -esac - -# If we're using kernel-mode PPPoE on Linux... -if test "$LINUX_PLUGIN" != "" ; then - PLUGIN_OPTS="plugin $LINUX_PLUGIN nic-$ETH" - if test -n "$SERVICENAME" ; then - PLUGIN_OPTS="$PLUGIN_OPTS rp_pppoe_service $SERVICENAME" - fi - modprobe pppoe > /dev/null 2>&1 -fi - -if test "$DEFAULTROUTE" != "no" ; then - DEFAULTROUTE="defaultroute" -else - DEFAULTROUTE="" -fi - -# Standard PPP options we always use -PPP_STD_OPTIONS="$PLUGIN_OPTS noipdefault noauth default-asyncmap $DEFAULTROUTE hide-password nodetach $PEERDNS mtu 1492 mru 1492 noaccomp nodeflate nopcomp novj novjccomp user $USER lcp-echo-interval $LCP_INTERVAL lcp-echo-failure $LCP_FAILURE $PPPD_EXTRA" - -# Jigger DNS if required... -if test "$DNSTYPE" = "SERVER" ; then - # Sorry, dude... - rm -f /etc/resolv.conf - ln -s /etc/ppp/resolv.conf /etc/resolv.conf -elif test "$DNSTYPE" = "SPECIFY" ; then - # Sorry, dude... - rm -f /etc/resolv.conf - echo "nameserver $DNS1" > /etc/resolv.conf - if test -n "$DNS2" ; then - echo "nameserver $DNS2" >> /etc/resolv.conf - fi -fi - -# PPPoE invocation -PPPOE_CMD="$PPPOE -p $PPPOE_PIDFILE -I $ETH -T $PPPOE_TIMEOUT -U $PPPOE_SYNC $CLAMPMSS $ACNAME $SERVICENAMEOPT $PPPOE_EXTRA" -if test "$DEBUG" != "" ; then - if test "$DEMAND" != "" ; then - echo "(Turning off DEMAND for debugging purposes)" - DEMAND="" - fi - echo "* The following section shows the pppd command we will invoke" >> $DEBUG - echo "pppd invocation" >> $DEBUG - echo "$SETSID $PPPD pty '$PPPOE_CMD' $PPP_STD_OPTIONS $PPPD_SYNC debug" >> $DEBUG - echo "---------------------------------------------" >> $DEBUG - $SETSID $PPPD pty "$PPPOE_CMD -D $DEBUG-0" \ - $PPP_STD_OPTIONS \ - $PPPD_SYNC \ - debug >> $DEBUG 2>&1 - echo "---------------------------------------------" >> $DEBUG - echo "* The following section is an extract from your log." >> $DEBUG - echo "* Look for error messages from pppd, such as" >> $DEBUG - echo "* a lack of kernel support for PPP, authentication failure" >> $DEBUG - echo "* etc." >> $DEBUG - if test -f "/var/log/messages" ; then - echo "Extract from /var/log/messages" >> $DEBUG - grep 'ppp' /var/log/messages | tail -150 >> $DEBUG - elif test -f "/var/adm/messages"; then - echo "Extract from /var/adm/messages" >> $DEBUG - grep 'ppp' /var/adm/messages | tail -150 >> $DEBUG - else - echo "Can't find messages file (looked for /var/{log,adm}/messages" >> $DEBUG - fi - date >> $DEBUG - echo "---------------------------------------------" >> $DEBUG - echo "* The following section is a dump of the packets" >> $DEBUG - echo "* sent and received by rp-pppoe. If you don't see" >> $DEBUG - echo "* any output, it's an Ethernet driver problem. If you only" >> $DEBUG - echo "* see three PADI packets and nothing else, check your cables" >> $DEBUG - echo "* and modem. Make sure the modem lights flash when you try" >> $DEBUG - echo "* to connect. Check that your Ethernet card is in" >> $DEBUG - echo "* half-duplex, 10Mb/s mode. If all else fails," >> $DEBUG - echo "* try using pppoe-sniff." >> $DEBUG - echo "rp-pppoe debugging dump" >> $DEBUG - cat $DEBUG-0 >> $DEBUG - rm -f $DEBUG-0 - for i in 1 2 3 4 5 6 7 8 9 10 ; do - echo "" - echo "" - echo "" - done - echo "*** Finished debugging run. Please review the file" - echo "*** '$DEBUG' and try to" - echo "*** figure out what is going on." - echo "***" - echo "*** Unfortunately, we can NO LONGER accept debugging" - echo "*** output for analysis. Please do not send this to" - echo "*** Roaring Penguin; it is too time-consuming for" - echo "*** us to deal with all the analyses we have been sent." - exit 0 -fi - -echo $$ > $PIDFILE - -while [ true ] ; do - if test "$OVERRIDE_PPPD_COMMAND" != "" ; then - $SETSID $OVERRIDE_PPPD_COMMAND & - echo "$!" > $PPPD_PIDFILE - elif test "$LINUX_PLUGIN" != "" ; then - $SETSID $PPPD $PPP_STD_OPTIONS $DEMAND & - echo "$!" > $PPPD_PIDFILE - else - $SETSID $PPPD pty "$PPPOE_CMD" \ - $PPP_STD_OPTIONS \ - $DEMAND \ - $PPPD_SYNC & - echo "$!" > $PPPD_PIDFILE - fi - wait - - if test "$RETRY_ON_FAILURE" = "no" ; then - exit - fi - - # Run /etc/ppp/pppoe-lost if it exists - test -x /etc/ppp/pppoe-lost && /etc/ppp/pppoe-lost - - # Re-establish the connection - $LOGGER -p daemon.notice \ - "PPPoE connection lost; attempting re-connection." - - # Wait a bit in case a problem causes tons of log messages :-) - sleep 5 -done |