66 files changed, 0 insertions, 15542 deletions
diff --git a/scripts/pppoe-setup b/scripts/pppoe-setup deleted file mode 100755 index 5665118..0000000 --- a/scripts/pppoe-setup +++ b/dev/null @@ -1,352 +0,0 @@ -#!/bin/sh -#*********************************************************************** -# -# pppoe-setup -# -# All-purpose slicing/dicing shell script to configure rp-pppoe. -# -# LIC: GPL -# -# Copyright (C) 2000 Roaring Penguin Software Inc. -# -# $Id$ -#*********************************************************************** - -# From AUTOCONF -prefix=/usr -exec_prefix=${prefix} - -# Paths to programs -IFCONFIG=/sbin/ifconfig -PPPD=pppd -PPPOE=${exec_prefix}/sbin/pppoe -ECHO=/bin/echo -LOGGER="/usr/bin/logger -t `basename $0`" - -# Set to "C" locale so we can parse messages from commands -LANG=C -export LANG - -CONFIG=/etc/ppp/pppoe.conf - -# Protect created files -umask 077 - -copy() { - cp $1 $2 - if [ "$?" != 0 ] ; then - $ECHO "*** Error copying $1 to $2" - $ECHO "*** Quitting." - exit 1 - fi -} - -$ECHO "Welcome to the Roaring Penguin PPPoE client setup. First, I will run" -$ECHO "some checks on your system to make sure the PPPoE client is installed" -$ECHO "properly..." -$ECHO "" - -# Must be root -if [ "`/usr/bin/id -u`" != 0 ] ; then - $ECHO "$0: Sorry, you must be root to run this script" - exit 1 -fi - -# Prototype config file must exist -if [ ! -r "$CONFIG" ] ; then - $ECHO "Oh, dear, I don't see the file '$CONFIG' anywhere. Please" - $ECHO "re-install the PPPoE client." - exit 1 -fi - -# Must have pppd -if [ ! -x $PPPD ] ; then - $ECHO "Oops, I can't execute the program '$PPPD'. You" - $ECHO "must install the PPP software suite, version 2.3.10 or later." - exit 1 -fi -export CONFIG -. $CONFIG - -if [ "$DEMAND" = "" ] ; then - DEMAND=no -fi - -# pppoe must exist -if [ ! -x "$PPPOE" ] ; then - $ECHO "Oh, dear, I can't execute the program '$PPPOE'. Please" - $ECHO "re-install the rp-pppoe client." - exit 1 -fi - -$ECHO "Looks good! Now, please enter some information:" - -while [ true ] ; do - $ECHO "" - $ECHO "USER NAME" - $ECHO "" - printf "%s" ">>> Enter your PPPoE user name (default $USER): " - read U - - if [ "$U" = "" ] ; then - U="$USER" - fi - - # Under Linux, "fix" the default interface if eth1 is not available - if test `uname -s` = "Linux" ; then - $IFCONFIG $ETH > /dev/null 2>&1 || ETH=eth0 - fi - $ECHO "" - $ECHO "INTERFACE" - $ECHO "" - $ECHO ">>> Enter the Ethernet interface connected to the DSL modem" - $ECHO "For Solaris, this is likely to be something like /dev/hme0." - $ECHO "For Linux, it will be ethn, where 'n' is a number." - printf "%s" "(default $ETH): " - read E - - if [ "$E" = "" ] ; then - E="$ETH" - fi - - $ECHO "" - $ECHO "Do you want the link to come up on demand, or stay up continuously?" - $ECHO "If you want it to come up on demand, enter the idle time in seconds" - $ECHO "after which the link should be dropped. If you want the link to" - $ECHO "stay up permanently, enter 'no' (two letters, lower-case.)" - $ECHO "NOTE: Demand-activated links do not interact well with dynamic IP" - $ECHO "addresses. You may have some problems with demand-activated links." - printf "%s" ">>> Enter the demand value (default $DEMAND): " - read D - if [ "$D" = "" ] ; then - D=$DEMAND - fi - - $ECHO "" - $ECHO "DNS" - $ECHO "" - $ECHO "Please enter the IP address of your ISP's primary DNS server." - $ECHO "If your ISP claims that 'the server will provide DNS addresses'," - $ECHO "enter 'server' (all lower-case) here." - $ECHO "If you just press enter, I will assume you know what you are" - $ECHO "doing and not modify your DNS setup." - printf "%s" ">>> Enter the DNS information here: " - - read DNS1 - - - if [ "$DNS1" != "" ] ; then - if [ "$DNS1" != "server" ] ; then - $ECHO "Please enter the IP address of your ISP's secondary DNS server." - $ECHO "If you just press enter, I will assume there is only one DNS server." - printf "%s" ">>> Enter the secondary DNS server address here: " - read DNS2 - fi - fi - - while [ true ] ; do - $ECHO "" - $ECHO "PASSWORD" - $ECHO "" - stty -echo - printf "%s" ">>> Please enter your PPPoE password: " - read PWD1 - $ECHO "" - printf "%s" ">>> Please re-enter your PPPoE password: " - read PWD2 - $ECHO "" - stty echo - if [ "$PWD1" = "$PWD2" ] ; then - break - fi - - printf "%s" ">>> Sorry, the passwords do not match. Try again? (y/n)" - read ANS - case "$ANS" in - N|No|NO|Non|n|no|non) - $ECHO "OK, quitting. Bye." - exit 1 - esac - done - - # Firewalling - $ECHO "" - $ECHO "FIREWALLING" - $ECHO "" - if test `uname -s` != "Linux" ; then - $ECHO "Sorry, firewalling is only supported under Linux. Consult" - $ECHO "your operating system manuals for details on setting up" - $ECHO "packet filters for your system." - FIREWALL=NONE - else - $ECHO "Please choose the firewall rules to use. Note that these rules are" - $ECHO "very basic. You are strongly encouraged to use a more sophisticated" - $ECHO "firewall setup; however, these will provide basic security. If you" - $ECHO "are running any servers on your machine, you must choose 'NONE' and" - $ECHO "set up firewalling yourself. Otherwise, the firewall rules will deny" - $ECHO "access to all standard servers like Web, e-mail, ftp, etc. If you" - $ECHO "are using SSH, the rules will block outgoing SSH connections which" - $ECHO "allocate a privileged source port." - $ECHO "" - while [ true ] ; do - $ECHO "The firewall choices are:" - $ECHO "0 - NONE: This script will not set any firewall rules. You are responsible" - $ECHO " for ensuring the security of your machine. You are STRONGLY" - $ECHO " recommended to use some kind of firewall rules." - $ECHO "1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation" - $ECHO "2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway" - $ECHO " for a LAN" - printf "%s" ">>> Choose a type of firewall (0-2): " - read a - if [ "$a" = 0 -o "$a" = 1 -o "$a" = 2 ] ; then - break - fi - $ECHO "Please enter a number from 0 to 2" - done - - case "$a" in - 0) - FIREWALL=NONE - ;; - 1) - FIREWALL=STANDALONE - ;; - 2) - FIREWALL=MASQUERADE - ;; - esac - fi - - $ECHO "" - $ECHO "** Summary of what you entered **" - $ECHO "" - $ECHO "Ethernet Interface: $E" - $ECHO "User name: $U" - if [ "$D" = "no" ] ; then - $ECHO "Activate-on-demand: No" - else - $ECHO "Activate-on-demand: Yes; idle timeout = $D seconds" - fi - - if [ "$DNS1" != "" ] ; then - if [ "$DNS1" = "server" ] ; then - $ECHO "DNS addresses: Supplied by ISP's server" - else - $ECHO "Primary DNS: $DNS1" - if [ "$DNS2" != "" ] ; then - $ECHO "Secondary DNS: $DNS2" - fi - fi - else - $ECHO "DNS: Do not adjust" - fi - $ECHO "Firewalling: $FIREWALL" - $ECHO "" - while [ true ] ; do - printf "%s" '>>> Accept these settings and adjust configuration files (y/n)? ' - read ANS - case "ANS" in - Y|y|yes|Yes|oui|Oui) - ANS=y - ;; - N|n|no|No|non|Non) - ANS=n - ;; - esac - if [ "$ANS" = "y" -o "$ANS" = "n" ] ; then - break - fi - done - if [ "$ANS" = "y" ] ; then - break - fi -done - -# Adjust configuration files. First to $CONFIG - -$ECHO "Adjusting $CONFIG" - -copy $CONFIG $CONFIG-bak -if [ "$DNS1" = "server" ] ; then - DNSTYPE=SERVER - DNS1="" - PEERDNS=yes -else - PEERDNS=no - if [ "$DNS1" = "" ] ; then - DNSTYPE=NOCHANGE - else - DNSTYPE=SPECIFY - fi -fi - -# Where is pppd likely to put its pid? -if [ -d /var/run ] ; then - VARRUN=/var/run -else - VARRUN=/etc/ppp -fi - -# Some #$(*& ISP's use a slash in the user name... -sed -e "s&^USER=.*&USER='$U'&" \ - -e "s&^ETH=.*Ð='$E'&" \ - -e "s&^PIDFILE=.*&PIDFILE=\"$VARRUN/\$CF_BASE-pppoe.pid\"&" \ - -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \ - -e "s/^DEMAND=.*/DEMAND=$D/" \ - -e "s/^DNSTYPE=.*/DNSTYPE=$DNSTYPE/" \ - -e "s/^DNS1=.*/DNS1=$DNS1/" \ - -e "s/^DNS2=.*/DNS2=$DNS2/" \ - -e "s/^PEERDNS=.*/PEERDNS=$PEERDNS/" \ - < $CONFIG-bak > $CONFIG - -if [ $? != 0 ] ; then - $ECHO "** Error modifying $CONFIG" - $ECHO "** Quitting" - exit 1 -fi - -if [ "$DNS1" != "" ] ; then - if [ "$DNS1" != "server" ] ; then - $ECHO "Adjusting /etc/resolv.conf" - if [ -r /etc/resolv.conf ] ; then - grep -s "MADE-BY-RP-PPPOE" /etc/resolv.conf > /dev/null 2>&1 - if [ "$?" != 0 ] ; then - $ECHO " (But first backing it up to /etc/resolv.conf-bak)" - copy /etc/resolv.conf /etc/resolv.conf-bak - fi - fi - $ECHO "# MADE-BY-RP-PPPOE" > /etc/resolv.conf - $ECHO "nameserver $DNS1" >> /etc/resolv.conf - if [ "$DNS2" != "" ] ; then - $ECHO "nameserver $DNS2" >> /etc/resolv.conf - fi - fi -fi - -$ECHO "Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets" -if [ -r /etc/ppp/pap-secrets ] ; then - $ECHO " (But first backing it up to /etc/ppp/pap-secrets-bak)" - copy /etc/ppp/pap-secrets /etc/ppp/pap-secrets-bak -else - cp /dev/null /etc/ppp/pap-secrets-bak -fi -if [ -r /etc/ppp/chap-secrets ] ; then - $ECHO " (But first backing it up to /etc/ppp/chap-secrets-bak)" - copy /etc/ppp/chap-secrets /etc/ppp/chap-secrets-bak -else - cp /dev/null /etc/ppp/chap-secrets-bak -fi - -egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets -$ECHO "\"$U\" * \"$PWD1\"" >> /etc/ppp/pap-secrets -egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets -$ECHO "\"$U\" * \"$PWD1\"" >> /etc/ppp/chap-secrets - -$ECHO "" -$ECHO "" -$ECHO "" -$ECHO "Congratulations, it should be all set up!" -$ECHO "" -$ECHO "Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring" -$ECHO "it down. Type 'pppoe-status' to see the link status." -exit 0 |